Manejo y control de grupo en el salon de clases
Controlling servopneumatic axes flexibly and dynamically
Info 137
Servopneumatics – at a glance
Servopneumatics: Free advancing to any position with maximum dynamics – can also handle high forces with ease.
Control the entire spectrum …
of servopneumatic …
positioning drives!
Flexible positioning with servopneumatics Ideal wherever • compact and cost-effect solutions are required, • the moved loads exceed 10 kg in weight, • positioning accuracy of a few tenths of a millimetre is sufficient.
Optimised cost-effectiveness Rule of thumb: the overall economy grows with the weight of the loads to be moved at high speed. Full application versatility Thanks to the wide range of drives with …ver más…
Info 137 – Subject to change – 2008/04
… with the rodless drives DGCI with integrated displacement encoder.
… with the rodless drives DGPI/DGPIL with integrated displacement encoder, for example. The pneumatic linear drives DGPI/DGPIL are available either with driver or slide.
… with the semi-rotary modules DSMI with integrated displacement encoder, for example, on the basis of the semirotary module DSM. The maximum swivel angle of the semi-rotary modules is 270°.
Diameter: 18 … 63 mm Stroke: 100 … 2,000 mm
Diameter: 25 … 63 mm Stroke: 225 … 2,000 mm
Sizes: 25, 40 Swivel angle (max.): 270° Torque (max.): 5 or 20 Nm
2008/04 – Subject to change – Info 137
Internet: www.festo.com/catalogue/...
5
Axis controllers SPC200
Key features At a glance SPC200 – the most unique positioning controller in the world for pneumatic and electrical positioning technology
Strength in variety • 1 to 4 positioning axes • 3 different pneumatic drive families • Stepper motor axes • Technology mix
Strength in flexibility • Digital inputs/outputs • Analogue inputs • Profibus, Device Net, Interbus • CPV valve terminals for pneumatic switching functions
Strength in modularity • Two housing sizes • 9 different plug-in cards • Combinable as required
Multi-purpose • Set selection for simple applications • Start/stop operation for demanding automation tasks • Up to 100 programs • Subprogram