NOTICE: This standard has either been superceded and replaced by a new version or discontinued. Contact ASTM International (www.astm.org) for the latest information.

Designation: D 5117 – 96

Standard Test Method for

Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock1
This standard is issued under the fixed designation D 5117; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.

1. Scope 1.1 This dye-penetrant test method covers a means of evaluating solid fiberglass …ver más…

Terminology 3.1 Definition of Term Specific to This Standard: 3.1.1 wicking—transmission of a gas or liquid due to pressure differential or capillary action along fibers incorpo1 This test method is under the jurisdiction of ASTM Committee D-20 on Plastics and is the direct responsibility of Subcommittee D20.18 on Reinforced Thermosetting Plastics. Current edition approved Nov. 10, 1996. Published May 1997. Originally published as D 5117 – 90. Last previous edition D 5117 – 90. 2 Annual Book of ASTM Standards, Vol 08.01. 3 Annual Book of ASTM Standards, Vol 08.02. 4 Annual Book of ASTM Standards, Vol 14.02.

Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.

1

NOTICE: This standard has either been superceded and replaced by a new version or discontinued. Contact ASTM International (www.astm.org) for the latest information.

D 5117
6. Apparatus 6.1 Dye Penetrant5 6.2 Ultraviolet Light Source—The penetrant used is fluorescent, and requires a black lamp light source. 6.3 Dark Room—An area for viewing the presence of fluorescent spots on the test specimens is required. 6.4 Hood—There is a need to provide adequate air ventilation for the elimination of any annoying vapors from the