PIC16F62X Data Sheet
FLASH-Based 8-Bit CMOS Microcontroller

 2003 Microchip Technology Inc.

Preliminary

DS40300C

Note the following details of the code protection feature on Microchip devices: • • Microchip products meet the specification contained in their particular Microchip Data Sheet. Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most …ver más…

iable operation • Multiplexed MCLR-pin • Programmable weak pull-ups on PORTB • Programmable code protection • Low voltage programming • Power saving SLEEP mode • Selectable oscillator options - FLASH configuration bits for oscillator options - ER (External Resistor) oscillator • Reduced part count - Dual speed INTRC • Lower current consumption - EC External Clock input - XT Oscillator mode - HS Oscillator mode - LP Oscillator mode • In-circuit Serial Programming™ (via two pins) • Four user programmable ID locations

High Performance RISC CPU:
• Only 35 instructions to learn • All single cycle instructions (200 ns), except for program branches which are two-cycle • Operating speed: - DC - 20 MHz clock input - DC - 200 ns instruction cycle Memory Device FLASH Program 1024 x 14 2048 x 14 RAM Data 224 x 8 224 x 8 EEPROM Data 128 x 8 128 x 8

PIC16F627 PIC16F628 • • • •

Interrupt capability 16 special function hardware registers 8-level deep hardware stack Direct, Indirect and Relative addressing modes

Peripheral Features:
• 16 I/O pins with individual direction control • High current sink/source for direct LED drive • Analog comparator module with: - Two analog comparators - Programmable on-chip voltage reference (VREF) module - Programmable input multiplexing from device inputs and internal voltage reference - Comparator outputs are externally accessible • Timer0: 8-bit timer/counter with 8-bit programmable prescaler • Timer1: 16-bit timer/counter with external